How do I get my printer to stop spooling?
Right-click “Print Spooler ” and select Stop. Within the Services window, find and right-click on the Print Spooler option. From the dropdown menu, select the Stop option. This will end the spooling service and cancel any documents in the printer queue.
Why is my printer stuck spooling?
Sometimes problems with printing stuck on spooling can occur due to your drivers, and one way to fix that problem is to reinstall your printer driver. To do that, follow these steps: Press Windows Key + X and select Device Manager from the list. When Device Manager opens, locate your printer.
How do I fix the print spooler on my HP printer?
- In your computer, go to the services management windows by typing the command “Services.
- Inside services, look for print spooler.
- Once located, right click on it and click on restart.
- You may also need to power cycle your printer after doing so, by turning it OFF and turning it ON again after 10 seconds of being OFF.
Should I Enable printer spooling?
This is called printer spooling. However, the printer spooling service must be enabled before you can print your business documents. If the print spooler is not running, you will receive an error that says, “The print spooler service is not running,” when you try to send a document to the printer.
How do you reset your printer?
- Power the printer off completely.
- While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
- While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
- Allow the printer to warm up as normal.
How do I force clear my printer queue?
- Select Start.
- Type Command.
- Right-click “Command Prompt” and select “Run as administrator“.
- Type net stop spooler then press “Enter“.
- Type del %systemroot%System32spool printers * /Q then press “Enter“.
- Type net start spooler then press “Enter“.
- The print queue on your Windows should now be cleared.
How do I force restart printer spooler?
How to restart the Print Spooler
- Scroll down the list and click or tap on Print Spooler.
- Click or tap on Restart the service.
- Windows will attempt to start the service.
- Once the Print Spooler status is Running (example below). The Print Spooler service is started.
How do I fix a print queue issue?
How to fix stuck printer queue on PC
- Cancel your documents.
- Restart the Spooler service.
- Check your printer drivers.
- Use a different user account.
How do I clear the print queue on my HP printer?
Cancel print job (Win 10) | HP
- Open the print queue. If a printer icon displays in the notification area, double-click the icon to open the print queue.
- Right-click the print job you want to cancel, and then click Cancel.
How do I stop my printer from spooling Windows 10?
The Print Spooler can also be stopped and started in the Services window, though the underlying method stays basically the same.
- Right-click the Start button.
- Click Run.
- Type services.
- Right-click Print Spooler — you might have to scroll down to find it.
- Click Stop.
How do I print directly to my printer?
Open the Printers folder, if it is not already displayed. Right-click the desired printer with a Barr port and select Properties. From the printer’s Properties dialog box, select the Advanced tab. In the middle of the dialog box, select Print directly to the printer.
Why does it take so long for my wireless printer to print?
When it comes to time efficiency however, wireless printers can lack the speed that’s capable through a USB or Ethernet connection. For example, cordless phones, wireless speakers, or even walls between your printer and the router can all result in slowing down your wireless printer.